| Webmaster | -- 12-17-2001 @ 1:51 PM |
|
I can't format newly created array either from RAID Toolbox or My Computer. This message was edited by Webmaster on 12-17-01 @ 1:54 PM
|
|
| Webmaster | -- 12-17-2001 @ 3:21 PM |
|
Check and make sure that the drives that you are looking to format appear in the 'Drives' column in RAID Toolbox. Also check to see when you create a stripe set that the stripe icon appears in the array column. If they don't, try checking the drive cabling, cycling the power on the drives by turning them off for about 30 seconds and turning them back on and/or rebooting your system. Regards, Webmaster
|
|
| RaidToolBox Discussions : | https://www.raidtoolbox.com/forum |
| Topic: | https://www.raidtoolbox.com/forum/viewmessages.cfm?Forum=1&Topic;=3 |