RaidToolBox Discussions / FAQ's - ATA NitroCannon RAID / CMOS Issues login join search

moderated by natef  Reply to Discussion | New Discussion << previous || next >>

Posted By Discussion Topic: CMOS Issues     Webmaster 05-28-2002 @ 3:44 PM                           reply edit profile Administrator Posts: 44 Joined: May 1999 Problems related to CMOS Webmaster 05-28-2002 @ 3:46 PM                           reply edit profile Administrator Posts: 44 Joined: May 1999 Set Mainboard CMOS Boot sequence to boot to ATA133 Raid Card On some Mainboard BIOS, it is necessary to set the Boot sequence to “SCSI, A:, C:” since the ATA133 Raid Card is identified as a SCSI card. Webmaster 05-28-2002 @ 3:47 PM                           reply edit profile Administrator Posts: 44 Joined: May 1999 Using an Onboard IDE Card with ATA 133 RAID card If an onboard IDE controller is installed with hard disks, enable support in the Mainboard Standard CMOS Setup for the drives. Note that the onboard IDE hard drives will then be the bootable hard disk unless the system BIOS has a boot sequence setting with the option to specify booting to a different device.

============ Forum Options ============= RAIDTOOLBOX     -- FAQ's - RAIDTOOLBOX     -- RaidtoolBox used on Win 2000 platform     -- RaidtoolBox used on Win XP platform ATA NitroCannon     -- FAQ's - ATA NitroCannon RAID     -- ATA NitroCannon installation Support ============= Other Options =============== ======================================== --- Log In --- Register --- Search

RaidToolBox Discussions Home | Back to RaidToolbox Support | Contact the Webmaster

Copyright © 2001, 2002 - Charismac Engineering Inc.
Powered by < CF FORUM > v.2.0